Skip to product information
1 of 7

Bluefin LED Piranha P12 Single-Colour Underwater Boat Light Bronze Base

Bluefin LED Piranha P12 Single-Colour Underwater Boat Light Bronze Base

Regular price $954.58 AUD
Regular price Sale price $954.58 AUD
Sale Sold out
Shipping calculated at checkout.

The Piranha P12 Single-Colour Underwater Light with bronze base is available in Diamond White or Cobalt Blue  Producing 6,800 fixture lumens, this light will help your boat stand out from the crowd in the marina, river or ocean.  

The P12 single-colour light works as follows:

  • When powered up for the first time or from reset, the light will appear in Standard mode. 
    • When turned off and on again quickly it will go to Strobe mode.
  • To re-set the light back to Standard mode, switch off the light and leave it for 5+ seconds.  Then switch it back on.

The light is controlled via a simple on/off toggle switch or via Bluefin’s IYS Control System for MFD/mobile devices.  Its ultra-compact, low-profile design is perfect for all types of boats, and is suitable for both transom & side-mounting on all hull types on boats up to 20m (65ft) long.  

The P12 light is also incredibly easy to install with just one small cable-entry hole and 3 mounting screws, and is suitable for a wide range of boats.  This model features an AB2 bronze base.

For the number of lights your boat needs to pack a colour punch, Bluefin recommends installing 1-5 lights from the Piranha range on the transom or side of centre-console and runabout boats.  Recommended spacing between the lights is from 1.2m (3ft 11 inches) to 2m (6ft 6 inches). 

This light offers amazing value for money and out-performs other comparably priced underwater lights.   

Features:

  • Single-colour light
  • Suitable for transom or side-hull mounting 
  • Surface-mount, requires 15mm cable-entry hole
  • Recommended for boats up to 20m (65ft)
    • However, the P12 lights have been successfully installed on yachts in the UK as long as 28m (95ft)
  • 12 x LEDs, producing 6,800 fixture lumens
  • Suitable for in and out-of-water use
  • IP68-rated gel connector provided
  • Two-year warranty

Also available as a dual-colour fixture in both Diamond White and Cobalt Blue (see related products).

If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat!  Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m.  

The human eye is sensitive to blue shades, so this colour stands out and is quite spectacular at night if you are looking for the fishing and party effect.  If you usually boat in clear water, white LED lights are stunning at highlighting the beauty of the water.

How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.  

Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.

Mounting Type: : Surface
Hole cut out size: 15mm (Gland size: 13mm)
Maximum Lamp Lumens: 9000
Fixture Lumens: 6800
Max Wattage: 55 Watts
Typical Life Expectancy: 50,000 hours
Voltage: Multivolt: 12V/24V
Power Draw: 4.6A @ 12V / 2.35A @ 24V
Protection: Over / Under Voltage, Over Current, Reverse Polarity protection,
Active thermal protection and Hydro block technology
Fixture Profile: 17.6mm
Fixture Diameter: 110mm
Lens Type: 3mm optical-grade high-impact polymer, Guard X Coating
Fixture Material: AB2 Bronze (standard)
Beam Angle: 60 Degree
Warranty:  2 Year
Type Approval: RINA IEC 60529
Available Colours: Diamond White 6500k or Cobalt Blue
Suitable Use: Above & below the water-line
Spacing: 1.2 - 2.0m
Driver Type: Integral
Total weight: 500g
Attached cable length: 1.8m
Included in box: In-line fuse holder & rated fuse, gel connector, inline crimps,
heat shrink, fixing screws, template and installation instructions
Optional Accessories:
(sold separately)
• Junction Box: 4-way IP68-rated Wiring Junction Box
• BL-Switch: Panel-mount illuminated switch & wiring loom
• 220/110V Power Supply: Power supply 24V for up to 5 lights
• I.Y.S Lighting Control: Control via MFD screen or mobile device
View full details