Skip to product information
1 of 3

Bluefin LED Piranha P4 Colour Change Underwater Boat Light Aluminium Base

Bluefin LED Piranha P4 Colour Change Underwater Boat Light Aluminium Base

Regular price $1,030.93 AUD
Regular price Sale price $1,030.93 AUD
Sale Sold out
Shipping calculated at checkout.

Introducing the all-new Piranha P4 High-Power, an exciting addition to the proven Piranha range.

Featuring patented X-Beam technology, the Piranha P4 colour-changing LED underwater light gives you the ability to showcase your boat in infinite colour choices.  No costly external controllers required - just hook up to a simple On/Off toggle switch for easy colour selection, or select to Strobe, which is proven to attract fish.  Producing 4000 fixture lumens, this light will help your boat stand out from the crowd in the marina, river or ocean, illuminating it in a rich array of colours that won’t fail to get your guests in the party mood.

How the P4 Colour-Changing light works:

  1. When powered up for the first time or from re-set, the light will appear in white, scroll through the colour range and keep scrolling until stopped by any of the steps below.
  2. To pick a particular colour, turn the light off and then on again within 1 second and the chosen colour will be selected (this may take a little practice as too fast or slow may not work).
  3. If you switch off and on again quickly for the second time the light will start to strobe.
  4. Switch off the light and leave for over 5 seconds.  When the light is switched back on the light will reset back in White mode.
  5. When the light colours become out of sync, simply repeat step 4 to re-set to initial colour cycle mode.  This process may need to be repeated more frequently when you have a higher number of lights installed on your boat.

Compact & low-profile design makes the Piranha P4 the perfect choice for all types of boats and hull materials.

Incredibly simple to install just one small cable entry hole and 3 mounting screws.

Features:

  • Marine-grade, hard anodised aluminium base
  • Optical grade high impact polymer lens
  • Colour-changing LEDs
  • Suitable transom or side hull mounting
  • Surface mount, requires 15mm cable entry hole
  • Recommended for boats up to 7m (25ft)
  • Voltage: 12/12V
  • Over voltage, current, reverse polarity, active thermal protection
  • Waterproof rating: IP69K
  • 2 years warranty

If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat!  Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m.  

The human eye is sensitive to blue shades, so this colour stands out and is quite spectacular at night if you are looking for the fishing and party effect.  If you usually boat in clear water, white LED lights are stunning at highlighting the beauty of the water.

How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.  

Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.

 

Mounting Type: Surface
Hole cut out size: 16mm
Maximum Lamp Lumens: 6000
Fixture Lumens: 4000
Max Wattage: 24 Watts
Typical Life Expectancy: 50,000 hours
Voltage: 12/24V
Power Draw: 12V @ 2A / 24V @ 1A
Protection: Over / Under Voltage, Over Current, Reverse Polarity protection,
Active thermal protection and Hydro block technology
Fixture Profile: 18.6mm
Fixture Diameter: 95mm
Lens Type: Optical grade high impact polymer, Guard X Coating
Fixture Material: Aluminium Hard Anodised
Beam Angle: 60 Degree
Warranty:  2 Year
Type Approval: RINA IEC 60529
Available Colours: Colour Change
Suitable Use: Suitable for in or out of water use
Spacing: 1.2 - 2.0m
Driver Type: Integral
Total weight: 208g
Attached cable length: 2m
Included in box: In-line fuse holder & rated fuse, Gel connector, Inline Crimps,
Heat shrink, Fixing Screws, Template and installation instructions
Optional Accessories:
(sold separately)
• Junction Box: 4-way IP68 Wiring Junction Box
• BL-Switch: Panel-mount illuminated switch & wiring loom
View full details