Bluefin LED Piranha P4 Underwater Boat Light Aluminium Base Single Colour
Bluefin LED Piranha P4 Underwater Boat Light Aluminium Base Single Colour
Introducing the all-new Piranha P4 High-Power, an exciting addition to the proven Piranha range.
Featuring patented X-Beam technology and a class leading 2750 Lumens in single colour - available in either Diamond White or Cobalt Blue.
Compact & low-profile design makes the Piranha P4 the perfect choice for all types of boats and hull materials.
Incredibly simple to install just one small cable entry hole and 3 mounting screws.
Features:
- Marine-grade, hard anodised aluminium base
- Optical grade high impact polymer lens
- Diamond White or Cobalt Blue LED
- Suitable transom or side hull mounting
- Surface mount, requires 15mm cable entry hole
- Recommended for boats up to 7m (25ft)
- Voltage: 12/12V
- Over voltage, current, reverse polarity, active thermal protection
- Waterproof rating: IP69K
- 2 years warranty
If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat! Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m.
The human eye is sensitive to blue shades, so this colour stands out and is quite spectacular at night if you are looking for the fishing and party effect. If you usually boat in clear water, white LED lights are stunning at highlighting the beauty of the water.
How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.
Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.
Mounting Type: | Surface |
---|---|
Hole cut out size: | 16mm |
Maximum Lamp Lumens: | 3500 |
Fixture Lumens: | 2750 |
Max Wattage: | 24 Watts |
Typical Life Expectancy: | 50,000 hours |
Voltage: | 12/24V |
Power Draw: | 12V @ 2A / 24V @ 1A |
Protection: | Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection and Hydro block technology |
Fixture Profile: | 18.6mm |
Fixture Diameter: | 95mm |
Lens Type: | Optical grade high impact polymer, Guard X Coating |
Fixture Material: | Aluminium Hard Anodised |
Beam Angle: | 60 Degree |
Warranty: | 2 Year |
Type Approval: | RINA IEC 60529 |
Available Colours: | Diamond White 6500k or Cobalt Blue |
Suitable Use: | Suitable for in or out of water use |
Spacing: | 1.2 - 2.0m |
Driver Type: | Integral |
Total weight: | 208g |
Attached cable length: | 2m |
Included in box: | In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink, Fixing Screws, Template and installation instructions |
Optional Accessories: (sold separately) |
• Junction Box: 4-way IP68 Wiring Junction Box • BL-Switch: Panel-mount illuminated switch & wiring loom |
Share
NEED HELP FINDING SOMETHING?
GIVE SAM A CALL TO DISCUSS YOUR REQUIREMENTS - 0449 045 297