Bomar Replacement Gasket Seal for Low Profile Extruded Hatches with 9mm Lens (sold per foot)

Replacement gasket seal to suit Bomar Low Profile hatches with 9mm lens thickness.

Suits:

• Bomar Low Profile Hatches 
• Bomar Low Profile Trapezoid Hatches
• Bomar Low Profile Round Hatches

Features:

• Black rubber gasket
• Sold per foot

Instructions on Replacing Bomar Hatch Gasket with Lip:

1. Pull out the old gasket 
    
2. Starting near a hinge, gently push the lip of the gasket into the space between the lens and extrusion.
    
3. Carefull cut the gasket to length forming a butt joint
    
4. Pull out two inches of the gasket either side of the joint and super glue together. Be very careful not to get superglue on the lens. Leave for about 5 minutes to allow the adhesive to completely set.
    
5. Push gasket back into the cavity and apply a drop of glue in the four corners to secure the gasket in place.