Panther Model 40 Motor Trim & Tilt Bracket

Panther Model 40 Motor Trim & Tilt - Designed for clamp-on motors up to 35hp or 150lbs

Part#: MT-55-0040

This economical trim and tilt bracket is designed specifically for the casual or weekend fisherman. The Model 40 is made from 1/4" heavy duty fabricated aluminium, finished with a durable black powder coat.

This bracket will accommodate 2 and 4 stroke clamp-on outboards up to 150 pounds or 35hp. The powerful electro-mechanical actuator provides automatic trim and tilt, controlled by a water resistant push-button up/down electric control on a 12 foot cable.

To provide adequate support for your Panther bracket, the transom side of the bracket must be fully covered by the boats transom.

Weight: 27lbs (12.5kgs)

Motor Plate Dimensions:

Height: 15" (38.1cm)

Width: 10 5/8" (26.99cm)

Thickness: 1/4" (0.64cm)

Setback: 7" (17.78cm)

Transom Plate Dimensions:

Height: 12" (30.48cm)

Width: 10" (25.4cm)

Thickness: 1/4"

Hole spacing of the transom plate

Top holes from top of transom plate - 2.5" to center (6.35cm)

Across top holes center to center - 7.5" (19.05cm)

Down side holes center to center - 4.5" (11.43cm)

Installation Manual